2013 John Deere X730 W/ 60HC DECK

On Sale
$6,000.00
Was $6,900.00


New/Used
Used
Usage
480 Hours
Availability
In Stock
Location
Pyramid Services
Stock #
010853 SDT
Title
Clean
Condition
Fair
Year
2013
Manufacturer
John Deere
Model
X730 W/ 60HC DECK
Horsepower
25
Power Type
Gas

Overview

Dealer Insights

Power 25.5 hp 19 kW
Displacement 45.5 cu in. 745 cc
Manufacturer/model FD750D EFI
Type Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
Cylinders V-twin, cast-iron liners
Governor Mechanical
Choke/speed control No choke required
Cooling method Liquid
Air cleaner Dry, replaceable with foam precleaner
Oil drain No tools
Fuel system
Type Gasoline
Fuel delivery Electronic fuel injection
Fuel gauge Gauge on dash
Fuel tank location Rear
Fuel fill opening On left fender, 3 in.
7.6 cm
Fuel tank capacity 5.2 U.S. gal.
19.7 L
Electrical system
Battery 12 V
300 CCA
Charging system Flywheel alternator, regulated, 20 amp
Engine starter Solenoid shift
Hourmeter Yes
Headlights Two standard, halogen, 37 W
Taillights or reflector Taillights
Backup lights Yes
Rear work lights Yes
12-V outlet Yes
Transaxle
Type K90 hydrostatic integrated with transaxle
Control Twin Touch? pedals
Cruise control Yes
Oil cooler Yes
Oil filter Replaceable suction side 10 micron
Differential lock Standard
Forward speed 0-8.5 mph
0-13.7 km/h
Reverse speed 0-6 mph
0-9.7 km/h
Brakes Internal wet disc
Chassis
Frame Welded heavy-duty
Primer/paint E-coat/powder
Weight bracket Standard front - holds up to four Quik-Tatch weights, 42 lb
19 kg
Receiver hitch Yes, front
Front axle JDM BA8 nodular iron casting
Spindle bushings Metal, replaceable
Front tires 18x8.5-8 turf
Rear tires 26x12-12 turf
Hood material Noryl GTX902, painted
Fender deck material RIM with in-mold paint
Floor mats Sure-grip rubber
Storage Covered toolbox
Service interval decal Yes
Fender handles/grips Handles
Cup holder Yes
Equipment mounting Optional category 1 3-point hitch
Steering
Type Hydraulic power
All-wheel steer Not available on this model
Steering wheel 14 in.
35.6 cm
Tilt steering wheel Standard, six position
Turning radius 25 in.
63.5 cm
Uncut circle radius 54 HC, 32 in.
81.3 cm
60 HC, 28 in.
71.1 cm
Seat
Type Two piece professional high back
Seat back height 21 in.
53.3 cm
Armrests Optional
Fore-aft adjustment While seated, slide rail, 14-position, 7 in.
17.8 cm
Seat suspension Six-position parallel arm
Lift system
Type Two-function hydraulic
Hydraulic outlets Four, standard
Mower cut height 1-5.25 in.
2.5-13.3 cm
Cut height increments 0.25 in.
0.64 cm
Preset cut height Yes

Mower deck
Type Side discharge
Construction Stamped steel deck shell
Mower deck material 60 HC, 9 gauge
Mower wash port Yes
Mower drive system Hydraulic clutch, shaft
Mower wheels Four
Mower wheel adjustment Spring-loaded pin
Mower level adjustment Exact Adjust ports and onboard deck-leveling gauge

Mower attachability
Front draft arms Overcenter
Rear draft arms V-align
Drive system AutoConnect

Safety
Meets ANSI standard Yes
Meets OPEI standard Yes
Backup protection Reverse Implement Option (RIO)